|
|
WTTM
Motorized Wire Terminal Pull Tester
|
2 Models Available
WTTM-110 -
Capacity: 110LB/50KG/500N
WTTM-220 -
Capacity: 220LB/100KG/1000N
The new Check•Line WTTM Motorized Wire Terminal
Pull Test is designed for tensile strength testing
of wire terminals in accordance with DIN, EN, BS,
IEC, UL, SAE and MIL standards
Its very simple operation allows the users to acquire
reliable and reproducible test results: the user
inserts the wire terminal into the receptacle adapter,
and the open wire end into the combined clamp-pull
device. After the protection cover has been closed,
the motor starts. The wire will be fixed into position,
and then constantly pulled.
Suitable for wires AWG 30 to AWG 8 (diameters from
0.010" to 0.130").
We also have available a manual
wire terminal pull tester.
|
Features
 Easy to use - with automatic peak value
recording, very high accuracy and reproducibility
of measurement results |
| Selectable pull rates of 1 to 10 inches/min
(25 to 250 mm/min) |
|
| Supplied with FREE Data Transfer program
and serial cable |
| Includes NIST Calibration Certificate |
|
Operating Procedure
To operate, simply follow
these steps:
1. Select the appropriately sized slot in the Wire
Terminal Fixture and rotate to the front position
2. Insert the terminal and wire so that it is secured
on the back-side of the slot
3. Route the wire so that it passes through the clamping
device
4. Select Peak-Hold or Continuous Measure mode using
the PEAK key
5. Press the ZERO key to perform tare function
6. Close the protective cover and the motor will start
the test
7. Read current force and breaking force on the digital
display
|
Dimensions
Complete Kit
| The WTTM is supplied as
a complete kit including Instrument with terminal adapter
and clamp-pull device, universal AC-Adapte/charger
100-240VDC, RS232-interface, connection cable for serial
I/O Port (9p-D-Sub), WTT-COMM software and operation
manual. |
 |
Specifications
| Measuring Range |
WTTM-110:
0-50 Kg / 0-110 lbs / 0-500N
WTTM-220: 0-100 Kg / 0-220 lbs / 0-1000N
(units selected via keypad) |
| Resolution |
WTTM-110: 0.01 Kg
/ 0.1 lbs / 0.1 N
WTTM-220: 0.1 Kg / 0.1 lbs / 1 N |
| Terminal Adapter Slot width (mm) |
0.5, 0.8,
1.0, 1.4, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0 |
| Accuracy |
±0.5% F.S. (±½ digit) |
| Operating Modes |
Real Time:
Displays actual value in Kg, lbs or N
Peak:
Displays peak value in Kg, lbs or N |
| Wire Diameter |
SAE AS7928 II: AWG 8...30
IEC 60352-2: Cross section 0.05...10mm²
Maximum: 0.236" (6mm) |
| Overload |
120% Full
Scale (LCD indicator at 120%) |
| Display |
LCD, 4-1/2 digit, 12mm high |
| Update Rate |
Real Time
Mode: 333msec
Peak Mode: 1msec |
| Memory |
Peak Value |
| Power Supply |
Universal
AC Adapter 100-240VDC (50/60Hz)
Internal NiCd battery |
| Interface |
RS-232C - 19,200 KB / 8 /
N / 1 / None (selectable baud rate) |
| Temp. Range |
Operating:
32 to 104° F (0 to 40° C)
Storage: -4 to 140° F (-20 to 60° C) |
| Weight |
42 lbs (19 Kg) (Shipping
weight 44lbs) |
| Dimensions |
13.8" x 6.3" 4.3" (350
x 160 x 110mm) |
| Material |
Anodized aluminum, steel
and stainless steel V2A |
| Item |
Price |
Description |
| WTTM-110 |
$3,500.00 |
WTTM-110 Motorized Wire
Terminal Tester |
| WTTM-220 |
$3,850.00 |
WTTM-220 Motorized Wire
Terminal Tester |
|
|
|
|
|
