TI-007DL
Precision Ultrasonic Wall Thickness Gauge with Data
Logging |
Measuring Range
0.0060 - 1.000 inches
0.15 - 25.4 mm The new CHECK-LINE TI-25DL
accurately measures wall thickness and the extent
of corrosion of all metals, ceramics, glass and
most rigid plastics - from only one side!
The TI-25DL incorporates a built-in memory for
1000 data points that can be separated into 10 separate
"batches." The stored data can be downloaded to
a serial printer or a personal computer. A Windows
compatible data transfer program is supplied at
no additional cost.
The gauge can be used in a Single Thickness Reading
mode or in two alternative modes, the Scan mode
and the and the Differential mode. The Scan modes
permits the user to "drag" the probe over a large
measuring area where the minimum thickness encountered
during the scan will be displayed. The Differential
mode displays the difference ("+" or "-") from a
set "nominal" value. |
Features of the TI-007DL wall thickness gauge:
 Resolution of 0.001 inch (0.01 mm) |
| Selectable units of inch or mm |
| Large, backlit LCD display retains last reading |
| Memory for 1000 data points in up to 10 batches |
|
| RS-232C Serial output for downloading stored
data to a printer or computer |
| Special-purpose probes are offered for a variety
of applications |
| Windows compatible data transfer program supplied
at no additional cost. |
|
Typical Applications for ultrasonic wall
thickness gauges:
Accessories:
Steel Test
Block
Precision Machined and Finished
Includes NIST Report and Test Data
Includes Wooden Storage Box |
 |
TICC-M Protective
Cover
Constructed from heavy duty Cordura Nylon
Built-in belt loop
Includes wrist & shoulder straps |
.jpg) |
Specifications:
| Range |
0.025-6.00"
(0.60-150.0 mm) |
| Resolution |
.0001" (0.001 mm) |
| Display |
4½ - Digit,
0.5" Backlit LCD |
| Velocity Range |
6,500-33,000 ft./sec (2000-10,000
m/sec.) |
| Probe |
7.5 MHz,
0.25" Diameter (6.35 mm) with rubber molded grip. |
| Probe Wearface |
PEEK (Polyethlethylketone) |
| Cable |
4 ft.
(1.2 m) waterproof cable with non-polarized, quick-disconnect
connectors. Optional lengths up to 50 ft. (15 m). |
| Serial Output |
RS-232C (8, N, 1, user-set
baud rate) |
| Temp.
Limits |
Ambient:
-20 to 120° F (-30 to 50° C)
Material: --ll0 to 200° F (-20 to 100° C
Special high temperature probes are optionally available. |
| Battery Type |
Two AA batteries |
| Size |
2.5 x
4.5 x 1.25"
(64 x 114 x 32 mm) |
| Accessories
Included |
Probe/cable assembly. 4
oz. bottle of coupling fluid, NIST Calibration Certificate,
2 AA batteries, operating instructions, hard-plastic
carrying case. |
| Warranty |
Gauge:
5 Years
Probes: 90 Days |
Measuring Limits:
Complete Kit:
| The
TI-25DL is supplied as a complete kit with the gauge,
probe, 4 oz. bottle of coupling fluid, 2 AA batteries,
NIST Calibration Certificate, data transfer software,
serial output cable and Operating Instruction Manual
- all in a foam-fitted carrying case. |
 |
|
|
